((( Wallen Antennae ))) We Design and Manufacture Quality Antenna Systems to meet High Performance Requirements

Sleeved Helical Antennae

The sleeved, hand portable helical antennae can be supplied factory tuned or in uncut lengths. All uncut units are supplied with a cutting chart specifying the exact number of turns to remove to achieve a specific frequency. This is more accurate than cutting to length and also allows installers more flexibility in their use of stock.

The sleeves are flexible and are made in a soft yet durable material which minimises the risk of injury from contact with face or body, which at the same time is able to resist the wear and tear typically encountered in civil engineering, maintenance and other such environments.

ORDERING INFORMATION

*Part no*	Centre Frequency	Band Width	*Use*
*HEL21*	169 MHz	8%	BUSINESS BAND
*HEL23*	157 MHz	8%	MARINE VHF BAND
*HEL24*	145 MHz	8%	2M AMATEUR BAND
*HEL25*	455 MHz	10%	HIGH BAND UHF
*HEL26*	430 MHz	10%	LOW BAND UHF & 70cm AMATEUR BAND
HEL27*	VHF UNCUT	8%	VHF DEALER TUNE*
HEL28*	UHF UNCUT	10%	VHF DEALER TUNE*

*Note: After tuning, sleeves must be secured to the antenna connector using cyanoacrylate adhesive (not supplied). On all pre-tuned antennae, this has been carried out during manufacture.

Connectors:

Standard:

BNC

Alternative:

TNC (no extra charge)

Also available:

6mm x 0.75 and ¼ x 32 tpi. studs SMA, etc.

Find Out More

Low band and flexi whip